Armor SX5000 Solvent Based Silane Siloxane Water Repellent Concrete Sealer

Description

The Armor SX5000 is a solvent based Silane Siloxane water repellent sealer that penetrates deep into the surface where it chemically reacts to form a hydrophobic barrier within the pores. The hydrophobic barrier, which can last for up to 10 years, will reduce surface water absorption by up to 95%. Surfaces sealed with the Armor SX5000 instantly become more resistant to the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and ice damage, staining, mold and mildew growth, and the formation of efflorescence. Approved by the Department of Transportation in several states, the Armor SX5000 is designed to protect the substrate without changing its natural, unsealed look. The Armor SX5000 is the best penetrating sealer for unsealed concrete, pavers, brick, natural stone, and masonry surfaces. Prefer water based sealers? Consider the Armor SX5000 WB instead!
Benefits:
Manufactured in the USA
Contains up to 5X more active ingredients than similar products
Will maintain the natural, unsealed look and feel of the substrate
Breathable, low VOC
Will provide up to 10 years of life before the need for a recoat
Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining
Will reduce the formation of efflorescence
Will reduce the formation of mold and mildew
Will reduce freeze-thaw and salt damage
Will reduce the movement of moisture through the concrete pores
Is approved by the Department of Transportation as a water repellent sealer
Coverage: One 5 Gallon pail covers up to 1,000 square feet in one coat. Two coats are suggested for a consistent coverage. Coverage rates may vary depending on surface porosity.